Effect
❾➴ Setting RGB Values
1.Select the [RGB] sub menu and then press the OK button. The RGB menu bar will appear as shown.
2.Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- Up/Down Button: Navigates between R, G, and B icons.
EXIT:SH1SET:OK
-Left/Right Button: Changes value of each icon.
3.When you press the OK button, the value you set will be saved and RGB setup mode will end.
Sharpness
❾✃ You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory.
NOR
SHARPNESS
SOFT
NORMAL
VIVID
[ PROGRAM mode ]
Sub menu | Icon | Description |
The edges of the image are softened.
SOFT
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
NORMAL
This is suitable for printing.
The edges of the image are emphasized. The edges will
VIVID
appear sharp, but noise may occur in the recorded image.
❾➓47❾➔