[Selecting the 10 SEC self-timer]

Self-timer( )/ Right button

❾✃ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab.

❾✃ When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-

timer( ) button. This function is used when the photographer would also like to be in the image.

❾➴ Selecting the self-timer

1.Rotate the MODE DIAL to select a RECORDING mode with the exception of VOICE RECORDING mode.

2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor.

A 2 second, 10 second or double self-timer icon appears on the LCD monitor. In Movie Clip mode, only the 10- second self-timer will work.

❾➁2SEC self-timer (

)

: Pressing the shutter button will allow an interval of 2

seconds before the image is taken.

❾➁10SEC self-timer (

)

: Pressing the shutter button will allow an interval of 10 seconds before the image is taken.

❾➁Double self-timer (

)

: A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be

delayed for longer than 2 seconds depending on the flash charge time.

3.When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.

INFORMATION

❾➴ The default is OFF.

❾➴ When taking a picture using the self-timer, the function lamp works as follows: 2 second self-timer setting : The function lamp blinks at 0.25 second interval for

2 seconds.

10 second self-timer setting : The function lamp blinks at 1 second interval for the first

7 seconds. It blinks at 0.25 second interval for the remaining 3 seconds.

❾➴ If you operate the Power button, Mode dial, Play mode button, Self-timer button and shutter button during the self-timer operation, the self-timer function is cancelled.

❾➓33❾➔