Samsung EC-A7ZZZSBA/US, EC-A7ZZZSBB/E1, EC-A7ZZZSBB/US, EC-V70ZZSAA, EC-A7ZZZSBA/E1 Function lamp

Function lamp

❾➴ Description of the Function lamp

Function	Description
During power-on	Function lamp blinks and then turns off when the camera is ready to
	take a picture
After an image is captured	Function lamp will blink once.
During voice recording	Function lamp will blink at a 1-second interval.
While recording a movie clip	Function lamp will blink at a 1-second interval.
When the self-timer is	Even if the function lamp is set to OFF, the self-timer lamp will work.
activated	(See page 33.)

Sound

❾✃ If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status.

❾➴ Setting Operation Sounds

1.In any mode with the exception of Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3.Select the [SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH

5.Press the menu button twice and the menu will disappear.

	3072
	SETUP
IMPRINT	OFF
LAMP	LOW
SOUND	MEDIUM
BACK:	SET:OK

❾➓81❾➔