Starting PC mode
➃❃If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode".
➃❃In this mode, you can download stored images to your PC through the USB cable. ➃❃The LCD monitor is always turned off in PC mode.
➃❃The camera status lamp will blink when the files are transferring via the USB connection.
❾✃ Connecting the camera to a PC |
|
|
|
|
|
|
|
|
1. Turn the PC power on. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
2. Turn the camera power on. |
|
|
| 3072 |
|
|
| |
3. In any mode other than Voice Recording mode, press |
|
|
| SETUP | ||||
the MENU button. |
|
| LAMP |
| COMPUTER |
|
| |
4. Press the LEFT/ RIGHT button and select the [SETUP] |
|
| SOUND |
| PRINTER |
| ||
menu tab. |
|
| USB |
|
|
|
|
|
|
| BACK: |
| SET:OK |
|
| ||
|
|
|
|
|
|
|
|
|
5.Select the [USB] menu by pressing the UP/ DOWN button and press the RIGHT button.
6.Use the UP and DOWN buttons to select [COMPUTER], and then press the OK button.
7.Press the menu button twice and the menu will disappear.
8.Connect the PC and the camera via the USB cable.
-Insert the small plug of the USB cable into the camera USB connection terminal.
-Insert the large connector of the USB cable into the USB port of the PC.
-The plugs must be firmly inserted.
❾➪ If you selected [PRINTER] in Step 6, when you connect the camera to your printer, the [CONNECTING…] message will be displayed on the LCD monitor and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 3 and onward.
❾✃ Disconnecting the camera and PC : Refer to page 107(Removing the removable disk).
INFORMATION
❾➴ The camera driver must be installed before using PC mode.
❾➴ To save battery power, it is recommended that you use an AC adapter (Optional) when connecting the camera to a computer.
❾➓102❾➔