3.Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the bottom edge of the slot.

4.Push the hinge locks up against the front frame of the oven cavity to the locked position.

Hinge lock

Unlocked position

Locked position

5. Close the oven door.

REMOVING AND REPLACING THE WARMING DRAWER

Turn the power OFF before removing the warming drawer.

CAUTION

How to remove the warming drawer

1.Open the drawer to the fully opened position.

2.Locate the glide lever on each side of the drawer; push down on the left glide lever and pull up on the right glide lever.

Lever

Lever

Push down on the left guide

Pull up on the right guide

3. Pull the warming drawer away from the range.

How to replace the warming drawer

1.Replace the shield on the right glide of the drawer body.

2.Pull the bearing glides to the front of the chassis glide.

3.Align the glide on each side of the drawer with the glide slots on the range.

4.Push the drawer into the range until levers click (approximately 2 inches). Pull the drawer open again to seat bearing glides into position. If you do not hear the levers click or the bearing glides do not feel seated, remove the drawer and repeat steps 1-This will minimize possible damage to the bearing glides.

_ Maintaining your appliance

Page 48
Image 48
Samsung FTQ352IWUX/ZAM manual Removing and Replacing the Warming Drawer, How to remove the warming drawer