Y O U R N E W T V
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. For more information on connecting equipment, see pages 14~22.
ŒANTENNA terminals
Two independent cables or antennas can be connected to these terminals. Use “ANT 1 IN (Air)” and “ANT 2 IN (Cable)” terminals to receive a signal from VHF/UHF antennas or your cable system.
´DVI Video Input jack
(Digital Visual Interface)
Connect the DVI jack to a device with DVI output.
∏Video Input jacks
Connect to the video output jacks of VCRs, DVD players and similar devices.
”Audio Input jacks
Connect to the audio output jacks of VCRs, DVD players and similar devices.
’DVI Audio Input jacks
Connect to the audio output jacks of a device with DVI.
ˇAnynet
Please refer to the Anynet Owner’s Instructions.
¨OPTICAL Output jack
Connect to a Digital Audio component.
ˆCOAXIAL Output jack
Connect to a Digital Audio component.
ØAudio/Video Output jacks
Connect to the audio/video input jacks of a recording VCR.
˝COMPONENT Input jacks (Y, PB, PR, AUDIO-L/R)
Connect to the Component audio and video outputs of DVD or DTV
