O P E R AT I O N

3

Press the ENTER button. A crosshatch pattern will appear on the screen.

Move the cursor to the position you want to adjust by pressing the ▲/▼/œ/buttons, then press the ENTER button.

Adjust the convergence by pressing the ▲/▼/œ/buttons, then press the ENTER button.

4

If a horizontal line is visible, use the ▲ or ▼ button to move the line so that it is superimposed on the horizontal center-line (i.e., make a single horizontal line that is as white as possible.).

Red

Please Use Remote Control.

Red

Please Use Remote Control.

Red

Please Use Remote Control.

5

If a vertical line is visible, use the œ or button to move the line so that it is superimposed on the vertical-center line (i.e., make a single vertical line that is as white as possible.)

After the convergence is correctly adjusted, press the MENU button to exit.

Red

Please Use Remote Control.

6

To return to the factory defaults, select “Reset” by pressing the ▲ or ▼ button, then press the ENTER button.

The previously adjusted convergence will be reset to the factory defaults.

T V

Manual Convergence

Red

Blue

Reset

 

English - 29

Page 29
Image 29
Samsung HC-R4245W manual Red