
HDR44 4x4 High Definition Video Router
3. Connections
The HDR44 is part of an integrated system that requires the use of other ATON components. Depending on the system design, these components may include:
•R44IRM Slimline IR Remote Control
•R44WP HD Receive Wall Plates - one per zone
•HDR44 Router - for systems containing from 5 to 8 zones.
•ATON IR Receivers and Emitters
This section describes the connectivity between these various ATON components and the video source components that comprise the system. Each HDR44 system is unique, and not all con- nections will be made in every installation.
Important Safety Note: Make sure that the HDR44 is unplugged before making any connections.
ALL IR OUT
The ALL IR PORT is constantly active and passes IR information regardless of the source selected. This is useful for sources that may need control no matter which source is active, such as an HD TV Receiver, or for applications utilizing an expanded IR network including IR Distribu- tion devices such as ATON’s AIB4 Amplified IR Connection Block as shown below.
3.5mm Mono Interconnect Cable
HDR44
AIB4
Amplified
Connecting Block
Figure 3-1: All OUT
© 2008 • All rights reserved. | 11 |