Samsung manual Component Video Connections, HD Video Display IR Receiver, HDR44 BluRay Disc

HDR44 4x4 High Definition Video Router

SOURCE IR OUTPUTS

Connect a standard IR Emitter (ATON AIE2, for example) from the Source IR OUT port on the rear of the HDR44 to the IR receiver on the front of the audio/video source (see Figure 3-4). The four source IR outputs are source specifi c. For examle, IR port “1” must be mounted to the video source connected to “Component Video Input 1”. For sources that have an IR Input port on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable instead .

HDR44

3.5mm mono

interconnect cable

IR Emitter

BluRay Disc™

Figure 3-4 SOURCE IR OUTPUTS

Component Video Connections

HD Video Display

IR Receiver

R44WP

Y

L P

RP

HDR44

BluRay Disc™

Figure 3-5: Component Video Signal Chain

© 2008 • All rights reserved. 13