4 Press the ENTER button to start the auto program. By default, the cable TV system is set to “STD”.
If you want to select another type of cable system, press the œ button and use the … or † button to select “STD”, “HRC” or “IRC”.
Press the ENTER button.
•STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
Plug & Play
Selects a cable signal type for your location.
STD
Start
HRC
IRC
Move 
Enter 
Skip
Auto Program
Auto program in progress.
Cable 26 37%
Stop
Enter 
Skip
5 The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears. Press the ENTER button at any time to interrupt the memorization process.
Press the ENTER button, then the menu to set the clock mode is automatically displayed.
6 Press the ENTER button to select “Clock Mode”.
Press the … or † button to select “Auto” or “Manual”, then press the ENTER button.
Continued...
Auto Program
Auto Program is incomplete. 14 channels are memorized. Air : 9 Cable : 5
Skip
Plug & Play
Sets the current time manually or automatically.
Clock Mode | Auto |
|
| Manual |
|
Move | Enter | Skip |
English - 27 
