Operation

4 Press the or button to select the Antenna connection, then press the ENTER button.

Air : “Air” antenna signal

Cable : “Cable” antenna signal

Air+Cable : “Air” and “Cable” antenna signals

When selecting Cable TV system: Press the ENTER button to start the auto program. By default, the cable TV system is set to “STD”.

If you want to select another type of cable system, press the œ button and use the or button to select “STD”, “HRC” or “IRC”.

Press the ENTER button.

Auto Program

Selects the antenna to execute the Auto Program function.

AirStart

CableStart

Air+CableStart

Move Enter Return

Auto Program

Selects a cable signal type for your location.

STDStart

HRC

IRC

Move Enter Return

STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected.

5 Press the button to select “Start”, then press the ENTER button to start the auto program. The TV begins memorizing all available stations. Press the ENTER button at any time to interrupt the memorization process.

Press the EXIT button to exit.

The TV must be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.

Auto Program

Selects a cable signal type for your location.

STDStart

HRC

IRC

Move Enter Return

Auto Program

Auto program in progress.

Cable 26 37%

Stop

Enter Return

English - 32

Page 32
Image 32
Samsung HL-S6165W manual Selects a cable signal type for your location