Samsung HL-S6165W manual Setting Up the Remote to Operate Your Cable Box

Setting Up the Remote to Operate Your Cable Box

1 Turn off your cable box.

2 Press the CABLE button on your TV’s remote control.

3 Press the SET button on your TV's remote control.

	Using the number buttons on your remote control, enter three
4 digits of the cable box code listed on page 39 of this manual for
	your brand of cable box. Make sure you enter three digits of the
	code, even if the first digit is a “0”.
	(If more than one code is listed, try the first one.)
5	Press the POWER button on the remote control.
	Your cable box should turn on if your remote is set up correctly.

If your cable box does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of cable box. If no other codes are listed, try each code, 000 through 046.

Note on Using Remote Control Modes: Cable Box

When your remote control is in “CATV” mode, the volume buttons still control your TV’s volume.

English - 35