![](/images/new-backgrounds/1251861/25186171x1.webp)
Operation
Setting Up the Remote to Operate Your DVD
1 Turn off your DVD.
2 Press the DVD button on your TV’s remote control.
3 Press the SET button on your TV's remote control.
| Using the number buttons on your remote control, enter three |
4 digits of the DVD code listed on page 40 of this manual for your | |
| brand of DVD. Make sure you enter three digits of the code, even |
| if the first digit is a “0”. (If more than one code is listed, try the |
| first one.) |
|
|
5 | Press the POWER button on the remote control. |
Your DVD should turn on if your remote is set up correctly. |
If your DVD does not turn on after
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.
English - 36