Rear Panel Jacks

Use the rear panel jacks to connect components such as a VCR.

You can connect two different components such as two VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and one set of component video input jacks on the rear panel of your TV. For more information, please see “Connections”.

ŒANTENNA terminals

Two independent cables or antennas can be connected to these termi- nals. Use ANT-A and ANT-B terminals to receive a signal from VHF/UHF antennas or your cable system. Use the ANT A-OUT termi- nal to send the signal being received by the ANT-A terminal out to another component (such as a Cable Set Top Box).

The PIP channel can be received only when a signal source is connected to ANT-A.

´S-VIDEO INPUT jacks

Connects an S-Video signal from an S-VHS VCR or DVD player.

ˇVIDEO/AUDIO INPUT jacks(VCR1, VCR2)

Connect video/audio signals from external sources, such as a VCR or DVD players.

¨VIDEO/AUDIO MONITOR OUTPUT jacks

Sends a video signal from the TV to an external source, such as a VCR.

Note: Monitor Out is available only in RF, Video and S-Video modes.

ˆComponent1 jacks (Y, Pb, Pr, L, R)

Use these jacks to connect the component video/audio signals from a DVD player when using the component video input jacks.

Note: Only 480i and 408p formats are supported.

ØComponent 2, 3 jacks (Y, Pb, Pr, L, R) Receives the DTV video/audio signals from a set top box. Note: Only 480p, 720p and 1080i formats are supported.

PC AUDIO INPUT jacks

Connect these to the audio-output jacks on your PC.

DVI (Digital Video Interface) jack Receives the digital signals from a set top box or PC etc.

RS-232C jack

˝PC VIDEO INPUT jack

Connect to the video output port on your PC.

15

Downloaded from www.Manualslib.com manuals search engine

Page 15
Image 15
Samsung HLM507W, HLM437W, HLM617W, HLM5065W instruction manual Rear Panel Jacks, Antenna terminals