Special Features
64

Selecting a Signal Source (Antenna or Cable) for PIP

If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture sepa-
rately from the main picture. (If the main picture is ANT-B and the broadcasting sources are differ-
ent, making adjustments is necessary.)
1Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter.
2Move the joystick down to
select “Air or CATV”.
3If an antenna is connected,
the setting is “AIR.” If a Cable
TV system is providing the sig-
nal, move the joystick to the
left or right until the appropri-
ate type of cable system is
displayed (“STD,” “HRC,” or
“IRC”).
4Press Menu to exit.
BP68-00030A-4 4/15/05 8:34 PM Page 64
Downloaded from www.Manualslib.com manuals search engine