![](/images/new-backgrounds/1128002/12800267x1.webp)
O p e r a t i o n
Changing Channels
You can change channels on your TV by using the CH and CH
buttons, or by direct selec- tion using the number buttons. You can use the number buttons to tune to any channel (even one that has been erased or has not been memorized).
Using the Channel Buttons
Press the CH or CH
buttons to change channels. The TV changes each channel in order, up or down, depending on which button you press. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were not memorized or have been erased.
Using the Number Buttons
To change to
Example: For channel 4, press “0,” then “4.”
To select a channel over 100, press the +100 button first.
Example: For channel 122, press “+100,” then “2,” then “2.”
Using the Previous Channel
Press the
Scanning channels
You can automatically scan all of the channels in memo- ry at the touch of just one button. Press the Scan button on the remote control. The TV will change the channels automatically, one by one. Scanning channels will be displayed in the PIP window. To stop channel scan, press the Scan button again.
NOTE
•When the ANT B mode is selected, the channel scan function doesn’t work.
34
Downloaded from www.Manualslib.com manuals search engine