20
Connections

Connecting VHF and UHF Antennas

If you do not have a cable system, you will need to connect an antenna to your TV.

Antennas with 300-ohm Flat Twin Leads

If your antenna looks like this: it has 300-ohm flat twin leads.
1Place the wires from the twin
leads under the screws on the
300-75 ohm adapter. Use a
screwdriver to tighten the
screws.
2Plug the adapter into the
ANT-A terminal on the back
panel of the TV.

Antennas with 75-ohm Round Leads

If your antenna looks like this: it is an antenna with 75-ohm round leads.
1Plug the antenna lead into the
ANT-A terminal on the back
panel of the TV.
BP68-00030A-2 4/15/05 8:29 PM Page 20