Samsung HMX-S15BN/XAA wireless network connection, Auto Connecting To A Network, Submenu items

wireless network connection

and configuration (HMX-S15/S16 only)

AUTO CONNECTING TO A NETWORK

You can connect to a network using an AP (access point) in the wireless network service area.

PRECHECK!

Select the record ( / ) mode by pressing the MODE button. ￿page 27

1.Touch the Network () tab ￿ “Settings” ￿ “Access Point Setting.”

•The camcorder automatically scans for available APs available in the network.

•To reload the AP device list, touch the Refresh ( ) tab.

2.In the list that appears, touch the desired AP.

•The camcorder connects to the network if you are using an unsecured AP (an AP without a Security Key or Pass Phrase).

•If you select a WPS AP, touch the WPS PBC tab on the bottom of the LCD screen, and then press the WPS button on the AP device or router within 2 minutes, which will be activated on the screen.

•If you select a secure AP, touch the ( ) tab and proceed to the next step.

3.Configure the network settings. See the Submenu items below.

45#:  <.JO>	
	.*/

NOR

8JSFMFTT /FUXPSLJOH	OFF	
		.*/

1MBZ
UP
57 4IBSF

#BDLVQ
UP
1$ %FWJDF
UP
%FWJDF

4FUUJOHT

Submenu items

•Authentication: Select an authentication type according to your AP’s setting.

(Open, Shared, WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK). When you select Open or Shared, WPA is automatically set.

•Data Encryption: Select an encryption type according to your AP’s setting. (Disabled, WEP, TKIP, AES, TKIP/AES Mixed)

•Network Key: Enter the password using the keyboard that appears, and then touch the

( OK ) tab. For typing in characters using the virtual keyboard, see page 115.

• IP Setting: The default is Auto. To set the IP manually, refer to page 114.

4. Touch the ( OK ) tab.

/FUXPSL
4FUUJOH

"DDFTT
1PJOU
4FUUJOH

%FWJDF
*OGPSNBUJPO

"DDFTT
1PJOU
4FUUJOH

4BNTVOH
0VUEPPS 4BNTVOH
"#$

OFF	
	.*/

	
OFF	.*/

• The camcorder connects to the network via the selected AP.

• You can check the signal strength in the top right corner of the screen.

-JOLTZTWPS

WPS PBC

	AP Information	Signal Strength
	WPS (WiFi Protected Setup) AP		Not connected
	WPS The camcorder automatically connects to the wireless	OFF
	network safely and easily.		Very weak
	Secured AP
	The camcorder connects to the wireless network using the		Weak
	assigned password and IP setting.
	Ad-hoc AP		Normal
	It will connect to the network using a mobile terminal that
	supports wireless communication.		Very strong
112	Signal strength
	Displays the strength of the wireless signal from the AP device.