Samsung HMX-S15BN/XAA manual using with a Windows computer, USING THE Intelli-studio PROGRAM

using with a Windows computer

USING THE Intelli-studio PROGRAM

Using the Intelli-studio program built into your camcorder, you can transfer video and photo files to your PC using a USB cable and edit them on your PC screen. Intelli-studio offers the most convenient way for you to manage your video and photo files.

Step 1. Connecting the USB cable

3FNPUF0GG

1$
4PGUXBSF 0O

1.	Set “USB Connect: Mass Storage” and “PC Software: On.”	64# $POOFDU
	• These are the default settings.	57 $POOFDU (VJEF
2.	Connect the camcorder to a PC with the USB cable.	"OZOFU )%.*$&$

• A new file saving screen appears with the Intelli-studio main window. 

•Depending on your version of Windows, the removable disk window also appears.

3.Click “Yes.” The uploading procedure starts. Click “Yes” to confirm.

•If you do not want to save a new file, select “No.”

To disconnect the USB cable

To disconnect the USB cable after completing the file transfer, you must follow these steps:

1.Click the “Safely Remove Hardware icon” icon on the taskbar.

2.Select “USB Mass Storage Device,” and then click “Stop.”

3.If the “Stop a Hardware device” window appears, click “OK.”

4.Disconnect the USB cable from the camcorder and PC.

• Use the provided USB cable. (Supplied by Samsung)

•Make sure you insert the USB plug into the USB jack with the plug facing in the correct direction.

•Use the AC power adaptor to power the camcorder when transferring files to your computer.

•When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.

•If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop and the data may be damaged.

•If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the camcorder.

•Intelli-studio may not automatically run. If this occurs, access My Computer or Windows Explorer, open the

130 drive that corresponds to your camcorder, find Intelli-studio, and then run IStudio.exe.