NEC MT1060 E-17, Connecting Your VCR or Laser Disc Player, Connecting the Supplied Power Cable

Connecting Your VCR or Laser Disc Player

VIDEOIN

S-VIDEO IN

Video cable (not supplied)

S-video cable (not supplied)

Audio equipment

AUDIO IN

L R

VCR/ Laser disc player

AUDIO OUT
L	R

VIDEO OUT

S-VIDEO OUT

Audio cable (not supplied)

Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector.

To make these connections, simply:

1.Turn off the power to the projector and VCR, laser disc player or document camera.

2.Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the Video input on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.

3.Turn on the projector and the VCR or laser disc player.

NOTE: Refer to your VCR or laser disc player owner's manual for more informa- tion about your equipment's video output requirements.

NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan converter.

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.

First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet.

DVI IN

AUDIO

RGB2 IN

RGB1 IN

S-VIDEO IN

AUDIO

B/Cb G/Y

AUDIO

R

L/MONO

AUDIO

1 2

	REMOTE
	PC CONTROL
)	R
USB(MOUSE/HUB	L/MONO
	AUDIO
V
H
	AUDIO OUT
	AC IN
RGB OUT
	AUDIO
L/MONO	R
	AUDIO
VIDEO IN

E-17