Connecting Speakers
Speaker
Audio Cable
✱The speakers MUST have more than 7watts rating (impedance 8ohm).
How to Connect
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and
Connecting a VCR/Cable Box
Power Plug
Audio Cable
Video Cable
How to Connect
1 Connect
•For better video, you can use a
•You can attach the Ferrite Cores(supplied) to the both jacks of the Video cable. Simply set the Ferrite Cores right under the jacks.
Connecting PDP and Speakers / Stand and Speakers
1 Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws.
2 After removing the three screes on the PDP, clamp the speaker and the PDP together and fasten the screws.
Guide pole
Guide pole
22
• Stand and speakers
Guide pole
2 Connect an Audio cable between the Audio Output jack on the VCR/Cable box and the Audio Input jack (Video) on the PDP.
Videotape Playback:
1.Turn on PDP and press the Video or
2.Turn on your VCR, insert a videotape and press the Play button.
• For an explanation of Component video, see your VCR/Cable Box owner’s instruction.
23
