Samsung HPL5025 manual Viewing the Picture-in-Picture, Selecting the PIP Screen

Viewing the Picture-in-Picture

Selecting the PIP Screen

Press the Menu button. Move the joystick up or down to

1 select the “PIP”, then press the joystick to enter.

!Quick way to access the PIP: Just press “PIP” on the remote control.

Move the joystick left or right to select the “On”.

2 The PIP image will appear in the corner of the screen.

		PIP
Select		Off
Move	Enter	Exit
		PIP
Select		On
Locate
Source

Selecting an External Signal

You can use PIP to view a signal from an external source, such as a VCR.

	Press the Menu button. Move the joystick up or
1 down to select the “PIP”, then press the joystick to						PIP
				Select		On
	enter.			Locate
		!	Quick way to access the PIP source: Just press	Source
			“Source” in the cover on the remote control.
				Move	Adjust	Exit
2		Move the joystick up or down to select the
						PIP
		“Source”, then move the joystick left or right to
				Select		On
		enter.		Locate
				Source

Move Adjust Exit

Move Adjust Exit

3 Press the Menu button to exit.

Note

• The PIP function operates in only PC mode or Component2 mode.

Move the joystick up or down to select an external

3 signal, then move the joystick left or right.

The signal from these inputs will not appear if you have not connected any equipment to the PDP’s input jacks.

4 Press the Menu button to exit.

PIP

VIDEO

S-VIDEO

COMPONENT 1

MoveExit

28

29