Installing the Speakers on the Tallboy Stand
02 Connections
*
*
1.Turn the Stand Base
2.Insert small screws (4*20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.
!CAUTION : When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screw- driver- below 15 kg.f.cm)
1 |
Stand |
Base |
Stand |
2 |
3. Connect the upper Speaker to the assembled Stand. | 3 | Speaker |
|
Stand
4. Insert another large screw (5*15, For connecting Speaker & Stand) | 4 |
|
|
|
|
|
| ||
clockwise into the hole on the rear of the speaker using a screwdriver. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5. This is the appearance after the speaker is installed. Follow this steps | 5 |
|
|
|
|
to install other speaker. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
English 17