Samsung HT-D550/XN, HT-D555/TK, HT-D550/EN Description on RDS function, To show the RDS signals

Basic Functions

Description on RDS function

•PTY (Program Type) : Displays the type of programme currently being broadcast.

•PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters.

•RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters.

•CT (Clock Time) : Decodes the real time clock from the FM frequency. Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases.

•TA (Traffic Announcement) : TA ON/OFF it shows that the traffic announcement is in progress.

✎NOTE

RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.

To show the RDS signals

You can see the RDS signals the station sends on the display.

RDS DISPLAY

Press the RDS DISPLAY button while		1
listening to an FM station.
• Each time you press the button, the
display change to show you the
following information :
PS NAME	RT CT Frequency
PS	While searching, <PS> appears and
	then the station names will be
(Program
	displayed. <NO PS> appears if no
Service)
	signal is sent.
	While searching, <RT> appears and
RT	then text messages the station sends
(RadioText)	will be displayed. <NO RT> appears
	if no signal is sent.
Frequency	Station frequency (non-RDS service)

About characters shown in the display

When the display shows PS,or RT signals,the following characters are used.

•The display window cannot differentiate upper case and lower case letters and always uses upper case letters.

•The display window cannot show accented letters, <A,> for instance, may stands for accented <A’s> like <À, Â, Ä, Á, Å and Ã.>

40 English

PTY (Program Type) indication and

PTY-SEARCH function

One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.

To search for a program using the PTY

codes

Before you start!

•The PTY Search is only applicable to preset stations.

•To stop searching any time during the process, press PTY SEARCH button while searching.

•There is a time limit in doing the following steps.

If the setting is cancelled before you finish, start from step 1 again.

•When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control.

DVD	TV
RDS DISPLAY			TA
1			3
		2
PTY-	PTY SEARCH		PTY+

4 5 6

1.Press the PTY SEARCH button while listening to an FM station.

2.Press the PTY- or PTY+ button until the PTY code you want appears on the display.

•The display gives you the PTY codes described to the right.

3.Press the PTY SEARCH button again, while the PTY code selected in the previous step is still on the display.

•The centre unit searches 15 preset FM stations, stops when it finds the one you have selected, and tunes in that station.

HT-D550-XU-ENG-1228.indd 40 2011-12-29 ￿￿ 11:15:52