Pioneer DEH-P7900UB Introduction of advanced operations, Tuning in strong signals, English

Operating this unit

Section

02

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option; press to se- lect.

The function name appears on the display.

3Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL to switch between the functions in the following order:

BSM (best stations memory)—Regional (re- gional)—Local (local seek tuning)—

PTY search (program type selection)— Traffic Announce (traffic announcement standby)—Alternative FREQ (alternative fre- quencies search)—News interrupt (news

program interruption)

# You can also select the function by pressing

FUNCTION on the remote control.

# If MW/LW band is selected, you can only se-

lect BSM or Local.

# To return to the frequency display, press

BAND.

# If you do not operate functions within about

30seconds, the display is automatically returned to the ordinary display.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under 1 to 6 on the remote control and once stored there you can tune in to those frequencies with the touch of a button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 1 to 6 on the remote con- trol.

1Use MULTI-CONTROL to select BSM in the function menu.

2Press MULTI-CONTROL to turn BSM on. Six strongest broadcast frequencies will be

stored in the order of their signal strength.

# To cancel the storage process, press MULTI-CONTROL again.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Use MULTI-CONTROL to select Local in the function menu.

2Press MULTI-CONTROL to turn local

seek tuning on.

# To turn local seek tuning off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to set the sensitivity.

There are four levels of sensitivity for FM and two levels for MW/LW:

FM: Level 1—Level 2—Level 3—Level 4

MW/LW: Level 1—Level 2

The Level 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Selecting alternative frequencies

When the tuner can’t get good reception, the unit automatically search for a different sta- tion in a same network.

1Use MULTI-CONTROL to select Alternative FREQ in the function menu.

English

En 13