
Section
02
Operating this unit
Adjusting 7-band graphic equalizer
For Custom1 and Custom2 equalizer curves, you can adjust the level of each band.
!A separate Custom1 curve can be created for each source. (The
!A Custom2 curve can be created common to all sources. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated.
1Recall the equalizer curve you want to adjust.
See Recalling equalizer curves on the previous page.
2Use
Frequency and the level (e.g., 50Hz +4) ap- pears in the display.
3Push
Each time
4Push
+6 to
or decreased.
# You can then select another band and adjust the level.
5Press BAND to cancel the
Adjusting loudness
Loudness compensates for deficiencies in the low- and
1 Use
2Press
on.
Loudness level (e.g., Mid) appears in the dis-
play.
# To turn loudness off, press
3Push
Each time
Using subwoofer output
This unit is equipped with a subwoofer output which can be turned on or off.
1Use
# You can also select the subwoofer setting menu by pressing SW on the unit.
2Press
Normal appears in the display. Subwoofer out-
put is now on.
# To turn subwoofer output off, press
3Push
Adjusting subwoofer settings
When the subwoofer output is on, you can ad- just the
1Use
# You can also select the subwoofer setting
menu by pressing SW on the unit.
# When the subwoofer output is on, you can se- lect Sub W.2.
2Push
Each time
30
En