
Section
02
Operating this unit
Switching the warning tone | Switching the dimmer setting |
If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.
1Use
2Press
tone on.
# To turn warning tone off, press
To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.
1Use
2Press
on.
# To turn dimmer off, press
Switching the face auto open
To protect against theft, this unit features de- tachable front panel. To detach the front panel easily, the front panel opens automatically. This function is on as a default.
1Use
2Press
auto open on.
# To turn the face auto open off, press
Adjusting the brightness
You can adjust the display brightness. Initially this mode is set to 12.
1Use
2Push
0to 15 is displayed as the level is increased or
decreased.
# When dimmer is functioning, the brightness level can be adjusted 0 to 10.
Switching the auxiliary setting
Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 37.
1Use
2Press
AUX2 on.
# To turn AUX off, press
Setting the rear output and subwoofer controller
This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker (Rear SP :F.Range) or subwoo- fer (Rear SP :S/W) connection. If you switch the rear output setting to Rear SP :S/W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for rear
1Use
34
En