Connections
Speaker Cable Connections
1.Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle to the colored sticker on the bottom or back of each speaker.
2.Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of the speaker plugs to the colors of the speaker jacks.
Front Speaker (R)
Subwoofer
Surround | Surround |
Speaker (L) | Speaker (R) |
SPEAKERS OUT |
|
| ||||
|
|
|
|
| : 3Ω |
|
FRONT R | FRONT | L | IMPEDANCE |
| ||
|
| |||||
SUBWOOFER | CENTER |
|
| |||
SPEAKERS OUT |
| AUX IN |
| FM ANT |
| |
|
|
|
|
| ||
|
| : 3Ω |
|
|
|
|
FRONT R | FRONT L | IMPEDANCE | L |
|
|
|
SUBWOOFER | CENTER |
| R |
| OPTICAL |
|
|
|
|
|
| DIGITAL | HDMI O |
|
|
|
|
| AUDIO IN | |
Front Speaker (L)
Center Speaker
Wireless Receiver Module
* This product should be connected with the
✎✎ If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.
✎✎ Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound from the speakers may be disrupted because of interference.
✎✎ If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.
✎✎ The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m), but may vary depending on your operating environment. If a
✎✎ If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the product turned off, press and hold
(mute) button on the remote control for 5 seconds. Turn on the wireless receiver module. Then, press and hold the "ID SET" button on the back of the wireless receiver module for 5 seconds, and then turn the product on.
