- English
Additional Information
~Certain HDMI output resolutions may not work,
depending on your TV.
~You must have an HDMI connection to enjoy
videos with 3D technology.
~A long HDMI cable may cause screen noise. If
this occurs, set to in the
menu.
~For some 3D discs, to stop a movie during 3D
playback, press the e () button once. The
movie stops and the 3D mode option is de-
activated.
To change a 3D option selection when you are
playing a 3D movie, press the e () button
once. The Blu-ray menu appears. Press the e
() button again, then select in
the Blu-ray menu.
~Depending on the content and the position
of the picture on your TV screen, you may see
vertical black bars on the left side, right side, or
both sides.
~Depending on the disc type, some aspect ratios
may not be available.
~If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
~If you select , your TV may display
(black bars on the sides of the
picture).
~When is , the setting
automatically defaults to and
appears in the menu.
~If the product is connected to a device that does
not support , you cannot use the
function.
~For proper operation of , set the
option in both the product and the TV to
.
~Be sure to select the correct or
you will hear no sound or just loud noise.
~If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
~Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
~Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
~This setup does not affect the
analog (L/R) audio or HDMI audio output to
your TV.
It affects the optical and HDMI audio output
when your product is connected to an AV
receiver.
~If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your
selections (PCM or Bitstream).
~ can be activated when
is set to .
~The Internet connection may be restricted while
you are using BD-LIVE contents.
~Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the
user manual of your TV.
~This function is not available if the HDMI cable
does not support CEC.
~If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
~In the external memory mode, disc playback may
be stopped if you disconnect the USB device in
the middle of playback.
~Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that
support the USB 2.0 protocol with 4 MB/sec or
faster read/write speeds.
~The Resume Play function may not work after
you format the storage device.
~The total memory available to
may differ, depending on
conditions.
~You cannot change the brightness of the
button and the , button.
Appendix