Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD ; D. IN ; AUX ; FM
03 Connections
R
W
HDMI OUT
(Cable not supplied.)
Method 1
Red | External Devices |
White
AUX | VIDEO |
IN | OUT |
L | FM ANT |
| |
R | OPTICAL |
DIGITAL | |
| AUDIO IN |
(Cable not supplied.)
Method 2
OPTICAL OUT
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analog component. Select the AUX mode.
•Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital optical cable.
Select the D. IN mode.
NOTE
\\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV. \\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components. \\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
English 17
