Samsung HTE3500ZA user manual The Initial Settings Procedure

Settings

The Initial Settings Procedure

•The Home menu will not appear if you do not configure the initial settings.

•The OSD (On Screen Display) may change in this product after you upgrade the software version.

•The access steps may differ depending on the menu you selected.

1 . Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen.

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English

Français

Deutsch

Español

Italiano

Nederlands

> Move s Select

2 . Press the ▲▼ buttons to select the desired language, and then press the v button.

3 . Press the v button to start function setup.

Initial Settings

TV Aspect and Network will be set.

Each setting may be changed later under "Settings".

Start

a Previous "Select

4 . The TV Aspect screen appears. Press the ▲▼ buttons to select desired a TV Aspect ratio, and then press the v button.

You have four choices:

16:9 Original - For widescreen TVs. Displays widescreen pictures in their orignal 16:9 format and 4:3 pictures (the old, standard format) in 4:3 pillar box format with black bars on the left and right.

16:9 Full - For widescreen TVs. Displays widescreen pictures in their orignal 16:9

format and expands 4:3 pictures to fill the 16:9 screen.

4:3 Letter Box - For older, standard screen analog TVs. Displays 4:3 pictures in full screen and 16:9 pictures in letter box format that retains the 16:9 aspect ratio but puts black bars above and below the picture.

4:3 Pan-Scan - For older, standard screen analog TVs. Displays 4:3 pictures in full screen and 16:9 pictures in Pan-Scan format that fills the screen, but cuts off the left and right sides of the picture and enlarges the middle vertically.

5 . The Network - Wired screen appears. -- If you have a network with dynamic IP

addresses - and most people do - select Auto, press the Enter button, and then go to Step 6.

-- If you have a network with static IP addresses, we suggest you select Skip by pressing the BLUE (D) button, and then go to "Configuring Your Network Connection" on page 24 after you have completed the initial setup. "Configuring Your Network Connection" provides a full explanation of how to configure your network connection manually.

-- If you have no network, select Skip by pressing the BLUE (D) button. The Initial Settings Complete screen appears, and then the Home screen appears.

NOTE

\\ If you skip network setup here or the setup does not work correctly, you can go to "Configuring Your Network Connection" on page 24 to set up the product's network connection later.

Initial Settings I Network - Wired

Choose the method to configure Internet Protocol (IP).

Please make sure that the Ethernet cable is connected.

Auto : Configure IP automatically.

Auto Manual

a Previous d Skip <Move "Select

6 . The product verifies the network connection and then connects to the network. When it is done, press the Enter button. The Initial Settings Complete screen appears, and then the Home screen appears.

English 19

04 Settings