❑❑Manual
If you have a static IP address or the Automatic procedure does not work, you’ll need to set the Network Settings values manually.
Settings
Display |
| Wired Network Settings |
|
|
| ||||
Internet Protocol Setup | : Manual |
| \ | ||||||
Audio |
| ||||||||
|
|
|
|
|
|
|
|
| |
Network |
| IP Address | : | 0 | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
|
|
| |
System |
| Subnet Mask | : | 255 | 255 | 255 | 0 |
|
|
|
|
|
|
|
|
|
|
| |
Language | Gateway | : | 0 | 0 | 0 | 0 |
|
| |
Security DNS | : Manual |
|
|
|
| ||||
General |
| DNS Server | : | 0 | 0 | 0 | 0 |
|
|
Support |
|
|
|
|
|
|
|
|
|
>Move "Select 'Return
1 . Follow the first four steps in the Automatic procedure, but select Manual instead of Auto in Step 4.
2 . Press the ▼ arrow button to go to the first entry field (IP Address).
3 . Use the number buttons on your remote to enter numbers.
4 . When done with each field, use the ► button to move successively to the next field.
You can also use the other arrow buttons to move up, down, and back.
5 . Enter the IP Address, Subnet Mask, and Gateway values.
6 . Press the ▼ button to go to DNS.
7 . Press the ▼ button to go to the first DNS entry field. Enter the numbers as above.
8 . Press the RETURN (') button on your remote.
9 . Select Network Status, and then press v.
10 . The Network Status screen appears.
The product verifies the network connection and then connects to the network. When it is done, highlight OK, and then press v.
NOTE
\\ You can get the Network values from your Internet provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Setting Values" on this page.
<Getting the Network Settings Values > You can view your Network Settings values on most Windows computers. To view the Network Settings values, follow these steps:
• Windows XP
1 · Right click the Network icon on the bottom right of the Windows desktop.
2 · In the
3 · On the dialog that appears, click the Support tab.
4 · On the Support tab, click the Details button. The Network settings are displayed.
•Windows 7
1 · Click the Network icon on the bottom right of the Windows desktop.
2 · In the
3 · On the dialog that appears, click the Local Area Connection.
4 · On the Support tab, click the Details button. The Network settings are displayed.
NOTE
\\ Depending on your Windows version, the information may differ.
04 Settings
English 25
