VTech LS6245 user manual Remote access code, Press the Menu softkey when the handset is not in use

Answering system settings

Remote access code

Atwo-digit security code is required to access the answering system remotely from any touch tone telephone. The preset code is 19. You can change the code to any number from 10 to 99.

To change the setting:

Using the telephone base:

1.Press the MENU softkey when the telephone base is not in use.

2.Press /VOL+ or VOL-/ to highlight Ans. system, then press the SELECT softkey.

3.Press /VOL+ or VOL-/ to highlight Ans sys setup, then press the SELECT softkey.

4.Press /VOL+ or VOL-/ to highlight Remote code, then press the SELECT softkey.

5.Use the dialing keys (0-9) to enter a two-digit number from 10-99, then press the SET softkey to confirm your setting.

Using the handset:

1.Press the MENU softkey when the handset is not in use.

Ans. system

Directory

Call log

Select

Del all old Record memo Ans sys setup

Select

Call screening

#of rings Remote code

Select

REMOTE CODE 19

SET

2.Press /VOL+/ or CID/VOL-

SELECT softkey.

3.Press /VOL+/ or CID/VOL-

SELECT softkey.

4.Press /VOL+/ or CID/VOL-

SELECT softkey.

/ to highlight Ans. System, then press the

/ to highlight Ans sys setup, then press the

/ to highlight Remote code, then press the

5.Use the dialing keys (0-9) to enter a two-digit number from 10-99, then press the SET softkey to confirm your setting; or press the BACK softkey to exit to the previous menu without making any changes.

40