Bluetooth

Bluetooth setup

To use a Bluetooth enabled cell phone or headset with your LS6245, you must first pair and connect your Bluetooth device(s) with the telephone base.

Setup cell

Before you begin, make sure that your Bluetooth enabled cell phone is not connected to any other Bluetooth device. Refer to your cell phone user's manual to learn how to search for or add new Bluetooth devices.

To pair and connect a cell phone:

1.Press the MENU softkey on the telephone base when it is not in use.

2.Press /VOL+ or VOL-/ to highlight Bluetooth, then press the SELECT softkey.

3.Press /VOL+ or VOL-/ to highlight Setup cell, then press the SELECT softkey.

If a device is already connected to the telephone base, Connected devs will be temp. disconnected displays. Press the OK softkey to temporarily disconnect the device and continue the pairing process.

4.Press the NEXT softkey to set the telephone base to discoverable mode.

5.Turn on the Bluetooth feature of your cell phone and search for or add new devices.

6.Once your cell phone finds VTech LS6245, select it.

7.Enter the PIN of the telephone base (the default PIN is 0000) into your cell phone to continue the pairing process.

8.When a device is successfully connected,

Device connected to base, and 1 and/or 2 displays.

When you already have two devices on the active devices list, press the YES softkey to connect to your paired cell phone. You are prompted to replace an existing device on the active devices list (page 18).

Page all HS

Intercom

Bluetooth

Select

Setup cell

Setup headset Active devices

Select

Pls set your cell to search for devices

next

LS6245

discoverable

PIN:0000

Pairing

complete

Device

connected

to base

The pairing process may take up to one minute. If the pairing process fails, try again.

14

Page 18
Image 18
VTech LS6245 user manual Bluetooth setup, Setup cell, To pair and connect a cell phone