connections

ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD OF THE SUBWOOFER

Attaching the Toroidal ferrite core to the power cord of the subwoofer helps prevent RF interference from radio signals.

1. Pull the fixing tab of the Toroidal ferrite core to open it.

2. Make two loops around the core with the power cable of the subwoofer.

3.Attach the Toroidal ferrite core to the Subwoofer power cord as the figure

shows and press it until it clicks.

LOOPING THE POWER CABLE AROUND THE TOROIDAL CORE

Lift up to release the lock and open the core.

Close the lock.

Make two loops around the core with the power

 

cable. (Start winding 5-10cm

 

away from the core).

12

Page 12
Image 12
Samsung HW-H430/XE manual Looping the Power Cable around the Toroidal Core, Make two loops around the core with the power