Samsung LE32MM8 manual Recording

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu	Description
View TV	Switches from Anynet+ to TV broadcast mode.
Select Device	Your TV connects to the corresponding device.
Record	Starts a recording. (This menu works only for a device supporting
	recording.)
Menu on Device	Shows the menu of the connected device.
	Example. When a DVD Recorder is connected, the DVD Recorder’s
	title menu appears.
Device Operation	Shows the play control menu of the connected device.
	Example. When a DVD Recorder is connected, the play control
	menu of the DVD Recorder appears.
Receiver	Sound is output through the receiver.
Setup	You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type	Operating Status	Available Buttons
	After switching to the	Numeric buttons
	device, when the menu of	▲/▼/◄/►/ENTER/OK buttons
	the corresponding device is	Colour buttons
Anynet+ Device	displayed on the screen.	EXIT button
	After switching to the device,	◄◄(Backward search)
		►►(Forward search)
	while playing a file	(Stop)
		► (Play/Pause)
Device with built-in Tuner	After switching to the device,	CH ▲/▼ button
	when you are watching a TV
	program
Audio Device	When Receiver is activated	VOL +/- button
		MUTE button
Anyview2	When watching TV	► (Play/Pause)

➣The Anynet+ function only works when the remote control is set to TV.

➣The REC button works only while in the recordable state.

➣You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the TV remote control.

➣The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.

➣The Anynet+ functions don’t operate for the products from other manufacturers.

➣In Anynet+ mode, the colour buttons may not work properly.

➣The ◄◄, ►► operations may differ depending on the device.

Recording

You can make a recording of a TV program using a recorder.

Press the REC button.

Recording begins. (Only when the Anynet+ enabled recording device is connected.)

➣The current TV program is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded.

➣You can also record the source streams by selecting Record after pressing the Anynet+ button.

➣Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual.

English - 56