Samsung LE32MM8 manual Setting Up Anynet+, Scanning and Switching between Anynet+ Devices

Setting Up Anynet+

The following settings are to use Anynet+ functions. Using the Anynet+ Function

1.Press the Anynet+ button.

Press the ▲ or ▼ button to select Setup, then press the ENTER/OK button.

2.Press the ENTER/OK button to select Anynet+ (HDMI-CEC), then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select On, then press the ENTER/ OK button.

➣The Anynet+ (HDMI-CEC) function is enabled.

➣If you select Off, Anynet+ (HDMI-CEC) is disabled.

➣When the Anynet+ (HDMI-CEC) function is disabled, all the

Anynet+ related operations are deactivated.

Air 28
View TV
Select Device		
Record		
Menu on Device		
Device Operation		
Receiver	:Off	
Setup		
Move	Enter
Exit
	Setup
Anynet+ (HDMI-CEC)			: OffOff
Auto Turn Off			:	OffOn
Searching Connections
Move		Enter			Return

Turning an Anynet+ Device Off Automatically when the TV is Turned Off
1. Press the ▲ or ▼ button to select Auto Turn Off, then press
	Setup
the ENTER/OK button.	Anynet+ (HDMI-CEC)		: On
2. Press the ▲ or ▼ button to select On, then press the ENTER/
OK button.	Auto Turn Off			: Off
				Off
➣ The Auto turn off function is enabled.	Searching Connections
➣ If you select Off, the Auto turn off function is canceled.				On
Press the EXIT button to exit.	Move	Enter			Return

➣The Select Device setting of the TV remote control is to be set to TV to use the Anynet+ function.

➣If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off. However, if the device is recording, it may not be turned off.

Scanning and Switching between Anynet+ Devices

1.	Press the Anynet+ button.		Air 28
2.	Press the ▲ or ▼ button to select Select Device, then press
			View TV
	the ENTER/OK button.					DVDR1
3.			Select Device
	Press the ▲ or ▼ button to select to a particular	device and				DVDR2
	press the ENTER/OK button.		Record			DVD1
	It is switched to the selected device.		Menu on Device			DVD2
4.		or ▼ button
	If you cannot find a device you want, press the ▲		Device Operation		
	to select Searching Connections, then press the ENTER/OK		Receiver	:Off	
	button.		Setup		
	The meassage Configuring Anynet+ connection... is		Move	Enter
	displayed. When searching devices completes, the connected		Return
	devices are listed in the Anynet+ menu.
				Setup
➣ Switching to the selected devices may take up to 2 minutes. You
			Anynet+ (HDMI-CEC)		:	On	
	cannot cancel the operation during the switching operation.
➣ The time required to scan for devices is determined by the number			Auto Turn Off		:	On	
	of connected devices.		Searching Connections				
➣ When the device scan is complete, the number of found devices
	is not displayed.		Move	Enter		Return
➣ Although the TV automatically scans devices when it is turned on
	using the POWER button, devices connected when the TV is on or under a specific circumstance are not
	displayed in the device list. Therefore select Searching Connections menu to search devices.
➣ If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+
	function. Make sure to switch to an Anynet+ device by using the Anynet+ button.

English - 55