Heatiator NB4236MI Appliance Setup, A. Remove the Shipping Materials, E. Clean the Appliance

Models: NB3933M NB3630M NB3630MI NB3933MI NB4236M NB4842MI NB4236MI NB4842M

1 68
Download 68 pages 37.26 Kb
Page 25
Image 25
12 Appliance Setup

12 Appliance Setup

A. Remove the Shipping Materials

Remove shipping materials from inside or underneath the firebox.

E. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated in- side the firebox or underneath in the control cavity.

B. Remove the Clean Face Components

Carefully remove skin pack from face of unit. Set aside.

C. Remove Glass Assembly

Pull the four (30/33/36 in. appliances) or seven (42 in. appliance) glass assembly latches out of the groove on the glass frame. See Figure 12.1.

Remove the glass panel from the appliance.

Lay aside out of the way on a non-abrasive surface.

Latches

(both bottom

and top)

Glass

Assembly

Figure 12.1 Glass Assembly

D. Accessories

Install approved accessories per instructions included with accessories. Refer to Section 16 for available optional ac- cessories.

A. Remove the Shipping Materials WARNING

Shock Risk

Fire Risk

Use ONLY optional accessories approved for this appliance.

Using non-listed accessories voids warranty.

Using non-listed accessories may result in a safety hazard.

Only Hearth & Home Technologies approved accessories may be used safely.

E. Clean the Appliance WARNING

Explosion Risk

Follow rockwool placement instructions in this manual.

Do NOT place rockwool directly over burner ports.

Replace rockwool material annually.

Improperly placed rockwool interferes with proper burner operation.

F. Lava Rock, Vermiculite, Rockwool Placement

See Figure 12.2 for placement location.

Placing the Rockwool

Rockwool is shipped with this gas appliance. To place the rockwool:

Place a small amount of 1/2 in. diameter pieces (dime-size) of rockwool on the burner pan so that the rockwool touches but does not cover the holes in the burner pan. This will provide the “glowing embers” look. It is not necessary to use the entire bag. Save the remaining rockwool for future use.

Placing the Lava Rock

See Figure 12.2.

Placing the Vermiculite

Sprinkle on top of lava rock.

Rockwool

B. Remove the Clean Face ComponentsLava Rock &C. Remove Glass Assembly

Vermiculite

Figure 12.2 Placement of Rockwool, Lava Rock and Vermiculite

Heatilator • Novus BV-Mesh4031-553 Rev F • 11/07

25

Page 25
Image 25
Heatiator NB4236MI Appliance Setup, A. Remove the Shipping Materials, E. Clean the Appliance, C. Remove Glass Assembly