3Com manual Shows a sample PathBuilder S330/S310 IP host setup

66CHAPTER 3: GETTING STARTED

2Select [1] Ethernet Port IP Configuration to display the Ethernet Port IP Configuration menu, shown in Figure 37.

Figure 37 Ethernet Port IP Configuration Menu

3Enter the following information (by selecting the appropriate options and responding to the prompts that appear at the bottom of the screen) to enable IP Ethernet connectors:

IP Address—Provided by the network administrator. This is the IP address of the PathBuilder S330/S310 Management CPU.

You should consult the network administrator to obtain an IP Address for the PathBuilder S330/S310 which will allow its 10BaseT Management port to co-exist with hosts on its local LAN.

Subnet Mask—Provided by the network administrator.

Community Name—Enter private (The community name applies to the SNMP SET operation.)

Figure 38 shows a sample PathBuilder S330/S310 IP host setup.

Figure 38 Sample PathBuilder S330/S310 IP Host Setup

PathBuilder

S330/S310

192.73.30.99

192.73.30.100 3Com Community

4Select [4] Previous menu to return to the Local Host IP Configuration menu.

5Select [2] Apply IP Configuration Changes to activate the IP address.