3Com S330 manual Configuring Trap Clients, Trap Client Configuration Menu

Performing Initial System Configuration 67

The IP address does not take effect until you apply your changes by selecting

[2]Apply IP Configuration Changes from the Local Host IP Configuration menu (step 5 above).

Configuring Trap Clients

Trap clients are the network management stations to which you want the PathBuilder S330/S310 to send traps. You can specify up to four trap clients. To configure trap clients, follow these steps:

1From the Manage IP Network Configuration menu, select [2] Trap Client Configuration to display the Trap Client Configuration menu, shown in Figure 39.

Figure 39 Trap Client Configuration Menu

2Select the number corresponding to the trap client you want to configure. Figure 40 shows the menu for configuring trap client 1.

Figure 40 Trap Client 1 Configuration Menu