3Com S330 manual Initial Add Virtual Circuit Screen, Selecting the Virtual Circuit Class

Configuring Virtual Circuits 135

2Select [2] Add Virtual Circuit. The Add Virtual Circuit screen appears as shown in Figure 104.

Figure 104 Initial Add Virtual Circuit Screen

3Enter a description for the virtual circuit you are defining.

We recommend that you do not use the description <366 call>. This is the default description that the system assigns to video virtual circuits when they are activated.

A second screen appears. As shown in Figure 105, the description you entered appears at the top of the screen, and a prompt at the bottom of the screen asks you to select the virtual circuit class: PVC, RS366 Template, VCM VCC, or VCM Subchannel. For descriptions of the available VC classes, see “Supported Classes of Virtual Circuits” earlier in this section.

Figure 105 Selecting the Virtual Circuit Class: