3Com S330 Configuring, Management CPU, Shapers. To display the Mcpu Menu, follow these steps

82CHAPTER 4: CONFIGURING PATHBUILDER S330/S310 MODULES, PORTS, AND APPLICATIONS

Using the List Card The List Card menu, shown in Figure 51, lists the shelf and all installed interfaces.

Menu

To display the List Card menu follow these steps:

1From the Main menu select [2] Configuration Management.

2From the Configuration Management menu, select [1] Manage Card.

Select [0] Shelf from the List Card menu to view configuration information for the shelf. The Shelf Configuration screen is a read-only screen that displays the Hardware Revision and Serial Number.

The remaining options (1 and above) on the List Card menu display menus that allow you to configure specific modules and ports. The following sections tell you how to perform the specific configurations available from the List Card menu.

Figure 51 List Card Menu

Configuring the	MCPU configuration involves viewing configuration information and managing
Management CPU	shapers. To display the MCPU Menu, follow these steps:

1From the Configuration Management menu, select [1] Manage Card to display the List Card menu.

2Select [1] MCPU to display the MCPU Configuration menu, shown in Figure 54.

From the MCPU Card menu, you access the submenus and screens from which you view configuration information and configure shapers, as described in the following subsections.