3Com S330 manual Adding IMA Groups, Add Group Menu Adding UNI Group

94CHAPTER 4: CONFIGURING PATHBUILDER S330/S310 MODULES, PORTS, AND APPLICATIONS

Figure 63 Add Group Menu (Adding UNI Group)

6Select [1] Set Admin. Port(s). The following prompt appears at the bottom of the screen:

Enter Admin Port(s):

7Enter the port numbers for the T1/E1 port you want to include in the UNI group.

8Select [2] Set Admin. Status and enter 2 to put the group in service.

9Select [3] Previous Menu.

10If desired, repeat steps 5-8 to set up a second UNI group and put it into service.

Adding IMA Groups

1From the Configuration Management menu, select [1] Manage Card to display the List Card menu, shown earlier in Figure 51.

2From the List Card menu, select [3] DS1 UNI to open the T1 (DS1) UNI or E1 UNI Configuration menu, shown earlier in Figure 58.

3From the T1 (DS1) UNI or E1 UNI Configuration menu, select [3] Group Configuration to display the Group menu, shown in Figure 64.