3Com S330 manual Logging On, For details about connecting the VT100 terminal

3

GETTING STARTED

This chapter tells you how to initialize and prepare SuperStack® II PathBuilder® S330 and SuperStack® II PathBuilder® S310 WAN access switches (PathBuilder S330/S310) for operation and how to use the PathBuilder S330/S310 menus. It contains the following sections:

■ Logging On

■ Using the Menus

■ Performing Initial System Configuration

■ Performing Additional Super User Functions

■ Configuring In-band Management

Logging On	You enter initial configuration information via the local user interface. This
	interface is presented on a VT100 terminal connected to the RS-232 (console) port
	on the front of the PathBuilder S330/S310, as shown in Figure 29. See Chapter 2
	for details about connecting the VT100 terminal.

Set the terminal for the following:

■9600 baud

■no parity

■8 data bits

■1 stop bit

Figure 29 NMS Terminal Connection Options

RS-232

10BASE-T

LAN

VT-100 NMS Terminal