
Performing Initial System Configuration | 69 |
Setting the Time and To set the time and date, follow these steps:
Date
It is important to set the time and date accurately because these settings provide the timestamp for alarms.
1From the System Administration menu, select [2] Manage Time and Date to display the Time and Date Configuration menu, shown in Figure 42.
Figure 42 Time and Date Configuration Menu
2Select [1] Set Date. The following prompt appears at the bottom of the screen:
Enter Date (mm/dd/yy)
3Enter the date.
4Select [2] Set Time. The following prompt appears at the bottom of the screen:
Enter Time (hh:mm:ss):
5Enter the time.
6Select [3] Previous Menu to return to the System Administration menu.
7Select [11] Previous Menu to return to the Main menu.
Setting up Passwords The PathBuilder S330/S310 supports a total of up to 10 logins at the following three access levels:
Super
■Set passwords
■Take over a
■Erase the system database