3Com S330 manual CE Notice

xiiCHAPTER : SUPPLEMENTARY REGULATORY INFORMATION

	Repairs to certified equipment should be made by an authorized Canadian
	maintenance facility designated by the supplier. Any repairs or alterations you
	make to this equipment, or equipment malfunctions, may give the
	telecommunications company cause to request that you disconnect the
	equipment.
CE Notice	Marking by the symbol CE indicates compliance of the equipment with the
	EMC, Telecom and Low Voltage dIrectives of the European Community. Such
	marking is indicative that this equipment meets or exceeds the following
	technical standards.
	EN55022 - Limits and methods of measurement of radio interference
	characteristics of information technology equipment.
	EN50082-1 - Electromagnetic compatibility - generic immunity standard part 1:
	residential, commercial, and light industrial.
	CTR 12 - Connection of 2 Mbit/s Unstructured Leased Lines.
	CTR13 - Connection to 2 Mbit/s Structured Leased Lines.
	EN 60950 - Safety of Information Technology Equipment including Electrical
	Business Equipment.
	EN 41003 - Particular safety requirements for electrical equipment to be
	connected to Telecom networks.
	WARNING: This customer equipment is to be installed and maintained by
	service personnel as defined by AS/NZS 3260 clause 1.2.14.3. (service
	Personnel). Incorrect connection of connected equipment to the General
	Purpose Outlet could result in a hazardous situation.
	WARNING: Safety requirements are not fulfilled unless the equipment is
	connected to a wall socket outlet with protective earth contact.