3Com S330 manual Configuring the Ethernet Interface

110CHAPTER 4: CONFIGURING PATHBUILDER S330/S310 MODULES, PORTS, AND APPLICATIONS

Configuring the Serial The only type of configuration you can perform on the serial card is to put it in Card service or out of service. To set the administrative status of the serial card, follow

these steps:

1From the Configuration Management menu, shown earlier in Figure 50, select [1] Manage Card to display the List Card menu, shown in Figure 51.

2From the List Card menu, select [5] SIM to display the SIM Configuration Port/Card Selection menu, shown in Figure 76.

3Select [2] Card Configuration to display the SIM Card Configuration menu, shown in Figure 80.

Figure 80 Configuring the Serial Card

4Select [1] Set Admin. Status to put the Ethernet card in service or out of service.

The maximum frame size is fixed at 8KB.

Configuring the Ethernet Interface

Configuring the

Ethernet Port

Configuring the Ethernet interface involves the following tasks:

■Configuring the Ethernet port

■Configuring the Ethernet card

■Configuring the bridge

The only type of configuration you can perform on the Ethernet port is to put it in service or out of service. To set the administrative status of the Ethernet port, follow these steps:

1From the Configuration Management menu, select [1] Manage Card to display the List Card menu, shown earlier in Figure 51.

2From the List Card menu, select [6] ETHERNET to display the Ethernet Configuration Port/Card Selection menu, shown in Figure 81.