3Com S330 manual Using, Configuration, Management Menu

Using the Configuration Management Menu 81

	The Equipment List displays the following information for each installed module:
	Slot—Slot number. This is a reference number for the ports on the motherboard.
	This number corresponds to the number on the List Card menu. (See Figure 51,
	later in this chapter.)
	Card type—The card type: Shelf, MCPU, CTX, T1/E1 UNI (4), OC3/STM-1 UNI,
	SIM, Ethernet, or CBR T-1DSX, or CBR E1.
	PART#-idprom—The part number as programmed at the factory.
	PART#-oem—The part number for OEM customers.
	Serial #—The serial number for the card. This is the same for all ports on the
	motherboard. The optional CBR module has a separate serial number.
	Rev #—The revision number for the card. This is the same for all ports on the
	motherboard, as they come already installed in the unit. The optional CBR module
	has a separate revision number.
Using the	Select [2] Configuration Management from the Main menu to display the
Configuration	Configuration Management menu, shown in Figure 50. Use this menu to access
Management Menu	submenus and screens that allow you to:
	■ Manage cards—View shelf configuration information and configure the
	PathBuilder S330/S310 CPU, CTX, ports, CBR module, and Voice Compression
	module.
	■ Manage circuits—List, add, modify, and delete virtual circuits.
	■ Manage the bridge—Set the bridge aging timer and configure the bridge.
	■ Manage the video dial feature—View the call routing table, manually start
	and end video dial-up sessions.
	Figure 50 Configuration Management Menu