3Com S330 manual Select 2 Clear Current Alarms

166CHAPTER 5: PATHBUILDER S330 DIAGNOSTICS AND PERFORMANCE STATISTICS

2Select [1] Display Current Alarms to view a list of current alarms, as shown in Figure 134.

Figure 134 Sample Current Alarm Display

To determine whether or not an alarm-generating condition has been resolved, clear the current alarms and recheck the Display Current Alarms screen, as follows:

1From the Display Current Alarm screen, press [Esc] to return to the Fault Management menu.

2Select [2] Clear Current Alarms.

3Enter y in response to the confirmation prompt to clear the current alarms.

4Select [1] Display Current Alarms to return to the Display Current Alarms screen.

■Alarm-generating conditions that are still present will regenerate alarms on the Display Current Alarms screen.

■Alarm-generating conditions that are no longer present will no longer generate alarms on the Current Alarm screen.

PathBuilder S330/S310 This section lists the alarm messages, meanings of the alarm messages, and Alarm Messages troubleshooting tips for the major errors reported from each of the PathBuilder

S330/S310 interfaces. It contains the following subsections:

■MCPU and CTX Module (System) Alarms

■Alarms Common to Several Interfaces

■DS1/E1 UNI Module Alarms

■DSX-1/E1 CBR Module Alarms

■SIM Alarms

■Voice Compression Module Alarms