3Com S330 manual Getting Started, Configuring In-band Management

Step 4: Connect I/O Cabling 40
Connecting to the T1/E1 UNI Interface			42
Connecting to the Serial Port	42
Connecting to the Ethernet Port		51
Connecting to the OC3/STM-1 Port		52
Connecting to the CBR Module	53
Connecting to the Voice Compression Module 55
Connecting to the DS3/E3 Module		56
Step 5: Connect the Management Terminal			57

3GETTING STARTED

Using the Menus	61
Navigating through the Menus			61
Understanding the Menu Hierarchy 61
Using the Menus to Change Settings				62
Alarm Indicator	62
Performing Initial System Configuration				63
Configuring the System Clock			63
Setting up Communication Parameters				64
Configuring the Local Host IP Address					65
Configuring Trap Clients		67
Configuring the Default Gateway				68
Setting the Time and Date		69
Setting up Passwords 69
Performing Additional Super User Functions					71
Taking over a Read-Write Session			71
Erasing the System Database		71
Configuring In-band Management			72

4CONFIGURING PATHBUILDER S330/S310 MODULES, PORTS, AND APPLICATIONS

Specifying General System Information			76
Viewing RS-232 Port Configuration Information 77
Viewing the Firmware Version		77
Downloading New Management Processor Firmware 78
Downloading via the Ethernet Port			79
Downloading via the Serial Port 79
Updating the Flash File System		80
Resetting the Interface Card	80
Viewing an Equipment List	80
Using the Configuration Management Menu				81
Using the List Card Menu 82
Configuring the Management CPU		82
Viewing MCPU Configuration Information				83
Configuring MCPU Shapers	83
Configuring the CTX 85
Configuring CTX Shapers	85